Electronics

32 products


  • iFJF Fan 50 Plus Pins Ignitor Board with Fan Control Only for 12 VDC Furnaces

    iFJF iFJF Fan 50 Plus Pins Ignitor Board with Fan Control Only for 12 VDC Furnaces

    1.【Upgrade】FAN 50 Plus Pins is designed to replace the new Suburban and Atwood/HydroFlame Fan Upgrade older furnaces to add the Fan Control feature.2.【Fitment Furnace】FAN50Plus Compatible with Atwood Hydro Flame Furnaces: 7912-II, 7916-II, 7920-II, 8012-II, FA 79D, HF 80D, DC82 25-32, DC82 35-41, FA 76D, FA 78 25-32, FA 72D, 8500-IV Series, 8500-III Series, 85-II Series, 85-I Series, 8900-I DC Series, 8900-II DC Series, 8900-III DC Series, AFSD12, AFSD16, AFSD20, AFMD20, AFMD25, AFMD30, AFMD35, DFMD20111, DFMD25111, DFMD30111, DFMD35111 DFSD12111, DFSD16111 and DFSD201113.【OEM Standard】The FAN50Plus RV ignition control board kit adopts SMT technology and undergoes multiple pre factory quality inspections. 4.【Sefety】The purpose of the fan control igniter board is to turn off the fan motor if the board fails to sense flame after the third ignition attempt. This reduces battery drain and eliminates unnecessary cold air blows.This board should not be used for DuoTherm 900 series furnaces or any other furnace that has the thermostat in the ground circuit.5.【Quality Assured】2 Year Unlimited--We extremely value your satisfaction and strive to provide you good shopping experience. Any product question, please feel free to contact us at any time

    $59.99

  • iFJF 628661 Refrigerator Power Circuit Board Kit Replacement for N41X N51X N6X N8X NX NXA N1095 Series

    iFJF iFJF 628661 Refrigerator Power Circuit Board Kit Replacement for N41X N51X N6X N8X NX NXA N1095 Series

    [OEM]:628661 [Applicable type]:N41X N51X Series- N410, N412, N510, N512.N6X Series - N611, N621, N621F, N623, N624, N641, N641F, N643.N8X Series - N811, N821, N821F, N821V, N822, N822F, N823, N824, N841, N841V, N842, N843.NX/ NXA Series - NX611, NX641, NXA641, NX811, NX841, NXA841.N1095 Series,1200 Series,1210 Series,1211 Series. [Features]:The panel is on the outside of the RV, so it is easily disturbed by rain and snow. After spraying and drying the nano waterproof coating on the electronic circuit board, a transparent and colorless molecular waterproof film chain can be formed in the water and attached normally. Protect the components so that water cannot touch the protection components. [Function]: After the product is installed, it can ensure that each cooling system is always in normal operation. [Notice]: If your refrigerator was manufactured Pre-2006, then this board will not fit,Manufactured before 2006, pin plug connectors (8 in two rows), this product is a single row.

    $75.99

  • iFJF Replace Dinosaur Electronics Universal Ignitor Board Small 12V UIB S

    iFJF iFJF Replace Dinosaur Electronics Universal Ignitor Board Small 12V UIB S

    DUAL SENSE - Flame sense works through high voltage connector and edge connector simultaneously EXTERNAL SENSE -Connector on the board for external sense wire DIAGNOSTIC-AID LED on board is green to show power to board Red to indicate power to gas valve VOLTAGE REGULATOR -Cleans up the 12 Volt supply power Size: 3.25 x 4.25 Inches, Fuse & Surge protected, Microcontrolled. Universal Ignitor Boards will fit most brands of furnaces, refrigerators and water heaters. Match the original by voltage rating and size. Three year registration card included with each board. Small board with spade connector, 12VDC operating voltage. Features 3-try ignition with delay. Measures 3. 25" x 4. 25". Ignition Control Circuit Board; For Coleman/ Duo-Therm/ Hydro-Flame/ Suburban Furnaces And Atwood/ Mor-Flo/ Suburban Water Heaters; 12 Volt DC; With Diagnostic LED; 4-1/4 Inch Length x 3-1/4 Inch Width; With Spade Spark Lead Connectors; Fuse And Surge Protected These universal 12 Volt DC ignitor boards are certified by Testing Engineers International to meet UL 372 and UL 353 specifications for use in the RV industry. The universal ignitor boards are all "electrically" identical but "mechanically" different for convenient installation. These rugged boards use double sided-plated thru hole technology for added reliability. They are fused to protect the board from short circuits in the NC and Valve circuitry. A two color LED monitors the NC and valve terminals to let you know when there is power to the board - "GREEN" and when there is power for the Valve - "RED". These delayed 3-try ignitor boards with 20 Second purge cycles and LOCAL flame sense also incorporate an option jumper. Removal of the jumper, for water heater and refrigerator use only, converts the board to instant fire with one Minute purge cycle between the three ignition tries.

    $76.99

  • iFJF R4192 Rev Counter Board for SW2000XLS Series Automatic Gate Operator

    iFJF iFJF R4192 Rev Counter Board for SW2000XLS Series Automatic Gate Operator

    Item Number: R4192 Rev Counter Board by GTO/Linear Pro For use with the SW2000XLS Series Gate Operators Waterproof coating: surface gel coating to refuse the erosion of moisture, enhance the practical cycle, do not have to worry about the impact of fog, rain, snow or heat and humidity, so you can easily drive into the home Save money: it is very difficult to find professional repair personnel engaged in these devices, now you can DIY to solve the main arm failure problem, which is very simple and saves you money

    $15.99

  • iFJF WR55X11132 Refrigerator Bulb Light For WR55X25754 WR55X26486 WR55X30602 4590213

    iFJF iFJF WR55X11132 Refrigerator Bulb Light For WR55X25754 WR55X26486 WR55X30602 4590213

    ✅【Important Tip】If your GE refrigerator LED lights flicker, dim or don't illuminate then you could order LED light, include 1PCS WR55X11132 WR55X25754 without plastic cover,you could easily install into your original housing. ✅【Replace Part Numbers】WR55X11132 WR55X25754 could replace WR55X30602 WR55X26486 PS4704284 3033142 EAP12172918 AP6261806 PS12172918 AP5646375 GE refrigerator LED light. ✅【Premium Quality & Center Reinforcement Design】The WR55X11132 WR55X25754 USE 2W LED and apply for waterproof treatment to make your refrigerator light work better than others. At the same time, aiming at the problem that the center part is easy to crush, the design of the product has been improved with a reinforced washer added at the center position to make the product more durable and have long-term use. ✅【Fit Models】The WR55X11132 WR55X25754 compatible for GE refrigerator lt c126 led GFE26GGHBBB LED light replacement, GE fridge GFE26GGHBWW LED light, GE freezer GFE26GGHCBB light bulb, GFE26GGHCWW GFE26GGHDBB GFE26GGHDWW GFE26GGHEBB GFE26GGHEWW GFE26GGHFBB GFE26GGHFWW GFE26GGHGBB GFE26GGHGWW GFE26GGKBBB GFE26GGKBWW GFE26GMHBES GFE26GMHCES GFE26GMHDES GFE26GMHEES GFE26GMHGES GFE26GMKBES GFE26GSHBSS GFE26GSHCSS GFE26GSHDSS GFE26GSHESS GFE26GSHFSS GFE26GSHGSS LED light.

    $15.99

  • iFJF PCBDM133S Defrost Control Board for HVACR Applications Model ANZ130181AA APD1424070M41AA Replaces PCBDM133 PCBDM160S PCBDM160

    iFJF iFJF PCBDM133S Defrost Control Board for HVACR Applications Model ANZ130181AA APD1424070M41AA Replaces PCBDM133 PCBDM160S PCBDM160

    【Fitment:】Suitable for use in HVACR applications like ANZ130181AA,APD1424070M41AA.(More models showed in pictures) 【Parts numbers:】PCBDM133S,PCBDM133,PCBDM160S,PCBDM160. 【Function:】The defrost control board for commercial air conditioning. The defrost control board senses when frost has formed on the evaporator coil and begins the defrost cycle. 【Attention:】Please check everything before going and replacing board,Frosting for too long may cause damage to other units, which may cause the new replaced circuit board to fail to work. 【Note:】Please field testing and troubleshooting before installing,then operate and install in sequence.

    $47.99

  • iFJF Leather Airpods Case Earphone Protective Skin Cover For Apple AirPod Pro 1 2

    iFJF iFJF Leather Airpods Case Earphone Protective Skin Cover For Apple AirPod Pro 1 2

    Model:Fit For Apple AirPods Pro Wireless Charging Case Useful: Designed for AirPods wireless headphone box, 100% fitting,not easy slide out and keep it always in new look. Special: Provides full protection for your device. Superior shock absorbing design, protect your headphone box body from dirty, bump and scrape, prevent abrase. Advantage: Precise hole location for charging port. Easy access to the charging port. Adds anti-slip bars on it's two sides. Durable: Made of environmentally-friendly medical-grade silicone, soft texture, not deform and offers wonderful grip. Good choice: Fashion but simple style fits and matches your headphone box perfectly. Ultra thin and use the most secure and slim way to carry your device. Colors: 2 colors available Package included: 1 x Cover for AirPods Pro (The Apple Airpods Pro is not included.)

    $13.99

  • iFJF Leather Airpods Case Earphone Protective Skin Cover For Apple AirPod Pro 1 2

    iFJF iFJF Leather Airpods Case Earphone Protective Skin Cover For Apple AirPod Pro 1 2

    Model:Fit For Apple AirPods Pro Wireless Charging Case Useful: Designed for AirPods wireless headphone box, 100% fitting,not easy slide out and keep it always in new look. Special: Provides full protection for your device. Superior shock absorbing design, protect your headphone box body from dirty, bump and scrape, prevent abrase. Advantage: Precise hole location for charging port. Easy access to the charging port. Adds anti-slip bars on it's two sides. Durable: Made of environmentally-friendly medical-grade silicone, soft texture, not deform and offers wonderful grip. Good choice: Fashion but simple style fits and matches your headphone box perfectly. Ultra thin and use the most secure and slim way to carry your device. Colors: 2 colors available Package included: 1 x Cover for AirPods Pro (The Apple Airpods Pro is not included.)

    $11.99

© 2024 iFJF Direct

    • PayPal

    Login

    Forgot your password?

    Don't have an account yet?
    Create account